Dodge Journey: Description
The parking brake consists of the following components:
- Foot-operated parking brake lever *
- Cables (front, left rear, right rear)
- Cable equalizer
- Caliper with Integral Parking Brake (IPB)
* Right-Hand-Drive Export models feature a hand-operated parking brake lever.
The parking brake lever is an automatic-adjusting type that continuously applies minimal tension to the parking brake cables to keep them in adjustment at all times.
The front cable extends from the lever to the parking brake cable equalizer. The equalizer joins the front cable to the left and right rear cables that extend to the individual rear calipers with Integral Parking Brake (IPB). The parking brake cables are made of flexible steel cable.
The brake caliper used for the foundation brakes features an Integral Parking Brake (IPB) which combines a mechanical parking brake function with a conventional rear caliper.
This caliper features a lever attached to a shaft on the outside of the caliper. The lever uses a ball-ramp mechanism to mechanically apply piston clamp force to the rear rotor when the parking brake lever is applied.
As the lever and shaft rotate, the ball-ramp interface causes the shaft to lift and the piston to travel toward the rotor.
The IPB includes an automatic adjuster mechanism that keeps the mechanical park brake mechanism in contact with the piston as the pads wear. The auto-adjuster is linked to the piston through a friction clutch that is used to detect pad wear.
Parking brake
...Standard procedure
PARKING BRAKE CABLE TENSION RELEASE - FOOT LEVER Use the following procedure to release the tension from the parking brake cables and the automatic adjuster in the parking brake lever (pedal) mech ...See also:
BRAKE SYSTEM
Your vehicle is equipped with dual hydraulic
brake systems. If either of the two hydraulic
systems loses normal capability, the remaining
system will still function. However, there will
be some ...
Arm, lower control
Diagnosis and Testing
LOWER CONTROL ARM
Inspect the lower control arm for signs of damage from contact with the
ground or road debris. If the lower
control arm shows any sign of damage, look for ...
Lamp, fog, rear export
Removal
BULB
Fig. 11: Rear Fascia Wire Harness Connector
1. Disconnect and isolate the battery negative cable.
2. Remove the rear fog lamp from the rear fascia.
3. Disconnect the rear fa ...