Standard procedure

REFRIGERANT SYSTEM SERVICE EQUIPMENT WARNING: Refer to the applicable warnings and cautions for this system before performing the following operation. Failure to follow these instructio ...

Description

FIXED DISPLACEMENT A/C COMPRESSOR Fig. 200: Denso 10SR17 Compressor NOTE: Denso 10SR17 shown. Denso 10SR15 similar. 2.7L and 3.5L 5-Passenger models are equipped with the Denso 10SR15 A/C ...

See also:

Description, Operation
DESCRIPTION Fig. 139: Blower Motor-PM The blower motor (1) is used to control the velocity of air moving through the HVAC housing by spinning the blower wheel (2) within the HVAC air inlet hous ...

Resistor, blower motor, rear
DESCRIPTION Fig. 62: Rear Blower Resistor A blower motor resistor is used on this model when equipped with the manual temperature control (MTC) rear heating-A/C system. Models equipped with the ...

Installation
Fig. 404: Identifying Shifter Mounting Bolts 1. Install the shifter mounting bolts and tighten to 20 N.m (15 ft. lbs.) in the proper sequence as indicated on drawing. Fig. 405: Identifying Sh ...