Fluid

Diagnosis and Testing BRAKE FLUID CONTAMINATION Indications of fluid contamination are swollen or deteriorated rubber parts. Swelling indicates the presence of petroleum in the brake fluid. To ...

Description, Operation

DESCRIPTION Fig. 87: PRIMARY AND SECONDARY BRAKE TUBES All master cylinders (2) are a two-outlet design and the brake tubes from these primary and secondary outlet ports lead directly to the In ...

See also:

Differential, transaxle
DESCRIPTION Fig. 166: Differential Assembly - RING GEAR - PINION SHAFT - DIFFERENTIAL CASE - PINION GEAR - SIDE GEAR The BG6 differential is a conventional open design, and is integr ...

Fascia, rear
REMOVAL Fig. 15: Push Pins 1. Open the hatch. 2. Remove the 6 pushpins (1) securing the fascia (2). Fig. 16: Rivets 3. Remove the rivets (2) and the Torx screw (3) around the wheel well for ...

Installation
WITH FOOT LEVER 1. Pass most of the front parking brake cable down through the access hole in the floor pan from inside the vehicle. Fig. 195: CABLE HOUSING RETAINED IN LEVER 2. Insert the lev ...