Installation

1. Completely retract the caliper piston back into the bore of the caliper. Use a C-clamp to retract the piston. Place a wood block over the piston before installing the C-clamp to avoid damagi ...

Removal

1. Disconnect and isolate battery negative cable from battery post. Fig. 70: BRAKE PEDAL HOLDING TOOL 2. Using a brake pedal holding tool as shown, depress brake pedal past its first inch of tra ...

See also:

Insulator, engine mount, right
Removal Fig. 243: Belly Pan 1. Remove the belly pan (2). Fig. 244: Right Engine Mount 2. Lower vehicle. Remove the load on the engine motor mounts by carefully supporting the engine assembly ...

PUBLICATION ORDER FORMS
To order the following manuals, you may use either the website or the phone numbers listed below. Visa, Mastercard, American Express, and Discover orders are accepted. If you prefer mailing your pa ...

Installation
BULBS HEADLAMP HIGH BEAM CAUTION: Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the lamp, the socket or ...