Removal, Installation

REMOVAL WARNING: To avoid serious or fatal injury on vehicles equipped with airbags, disable the Supplemental Restraint System (SRS) before attempting any steering wheel, steering co ...

Description, Operation

DESCRIPTION Two unique brake lamp switches are used in this vehicle, depending upon whether the vehicle was built during early or late production. These switches are not interchangeable and both a ...

See also:

Air cleaner
REMOVAL Fig. 85: Air Filter Housing Clips 1. Disengage the air filter housing clips (1). 2. Slide the air filter housing cover (2) forward slightly to disengage tabs from the bottom of the ai ...

Installation
LEFT-HAND-DRIVE NOTE: The master cylinder must be bled before installing it on the vehicle. 1. Bench bleed the master cylinder. 2. Wipe the face of the power brake booster clean where the ...

Removal, Installation
REMOVAL Fig. 298: Identifying Transmission Connectors - SOLENOID PACK CONNECTOR - INPUT SPEED SENSOR CONNECTOR - OUTPUT SPEED SENSOR CONNECTOR - TRANSMISSION RANGE SENSOR CONNECTOR ...