Dodge Journey: REPLACEMENT BULBS

All the inside bulbs are brass or glass wedge base.

Aluminum base bulbs are not approved and should not be used for replacement.

LIGHT BULBS – Interior Bulb Number

Courtesy/Reading Lamps (Incandescent). . . . . . . . 578. Courtesy/Reading Lamps. (Optional LED) . . . . . . . . . . . . . . . . . . . . . . . . . LED. (Serviced at Authorized Dealer). Glove Box Lamp . . . . . . . . . . . . . . . . . . . . . . . . . 194. Cargo Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . 579. Optional Door Map. Pocket/Cupholder . . . . . . . . . . . . . . . . . . . . . . . LED. (Serviced at Authorized Dealer).

LIGHTS BULBS – Exterior Bulb No.

Low Beam Headlamp. . . . . . . . . . . . . . . . . . . . . 9006.

High Beam Headlamp . . . . . . . . . . . . . . . . . . . . 9005.

Front Park/Turn Signal . . . . . . . . . . . . . . . . . 3757AK.

Side Marker Lamp. . . . . . . . . . . . . . . . . . . . . . . . 168.

Front Fog Lamp . . . . . . . . . . . . . . . . . . . . . . PSX24W.

Center High Mounted Stop Lamp (CHMSL) . . . . . . . LED (Serviced at Authorized Dealer) Rear Tail/Stop/Turn Signal . . . . . . . . . . . . . . . 3157K.

Rear Tail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3157K.

Backup Lamp . . . . . . . . . . . . . . . . . . . . . . . . . 3157K.

License Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . 168.

    VEHICLE STORAGE
    If you will not be using your vehicle for more than 21 days you may want to take steps to preserve your battery. You may: • Remove the IOD (Ignition Off-Draw) mini-fuses from the Totally Integra ...

    BULB REPLACEMENT
    Low Beam Headlamp, High Beam Headlamp, Front Turn Signal/Park Lamp, Side Marker Lamp 1. Open the hood. NOTE: It may be necessary to remove the air cleaner filter housing and position the Totally I ...

    See also:

    Installation
    1. Completely retract the caliper piston back into the bore of the caliper. Use a C-clamp to retract the piston. Place a wood block over the piston before installing the C-clamp to avoid damagi ...

    Mechanism, gearshift
    REMOVAL Fig. 193: Shift Cables To Shifter 1. Detach gear shift boot from console. 2. Remove the center console assembly. 3. Remove rear power window switch (if equipped) and disconnect ha ...

    Cooler and lines, oil
    Description Fig. 250: Oil Cooler Fasteners Some 2.7L engines may be equipped with an engine oil cooler (2) that is mounted to the rear transmission mount bracket. Oil lines route oil from the e ...


    0.0094