Dodge Journey: LIFTGATE
The liftgate can be unlocked or locked with the Remote Keyless Entry (RKE) transmitter or by activating the power door lock switch located on either front door trim panel.
NOTE: The liftgate cannot be unlocked or locked with the manual door lock plungers on the door trim panels or the door lock cylinder on the driver’s door.
To open the unlocked liftgate, squeeze the handle and pull the liftgate toward you. Gas props will raise and support the liftgate in the open position.
Liftgate Release
NOTE: Because the gas pressure drops with temperature, it may be necessary to assist the props when opening the liftgate in cold weather.
WARNING:
• Driving with the liftgate open can allow poisonous
exhaust gases into your vehicle. These fumes
could injure you and your passengers. Keep the
liftgate closed when you are operating the vehicle.
• If you are required to drive with the liftgate open, make sure that all windows are closed, and the blower switch on the climate control is set at high speed. DO NOT use the recirculation mode.
WINDOWS
Power Windows The window controls on the driver’s door trim panel control all of the door windows. Power Window Switches There are single window controls on each passenger door trim panel, wh ...OCCUPANT RESTRAINTS
Some of the most important safety features in your vehicle are the restraint systems: • Three-point lap and shoulder belts for all seating positions. • Advanced Front Airbags for driver and fr ...See also:
COMPASS MINI-TRIP COMPUTER (CMTC) — IF EQUIPPED
NOTE:
• The compass on your vehicle is self-calibrating, eliminating
the need to manually calibrate the compass.
• If the vehicle is equipped with a Chrysler gps
(Navigation Radio), the NAV sy ...
Input shaft, transmission
DISASSEMBLY
Fig. 175: Snap Ring At Input Shaft
1. Remove the snap ring (2) that retains the input shaft bearing and sixth
gear to the shaft.
Fig. 176: Press Bearing From Input Shaft
2. Using ...
Seal, oil pump
REMOVAL
Fig. 367: Removing Oil Pump Seal
- SEAL PULLER C-3981-B
- OIL PUMP SEAL
1. Remove transaxle from vehicle.
2. Using Seal Puller C-3981B (1) , remove oil pump seal (2).
INSTALLA ...