Assembly

Fig. 214: First Gear Needle Bearing & Output Shaft NOTE: Use ATF on all parts that are to be assembled in this procedure. 1. Install the first and first gear needle bearing (2) on the out ...

Disassembly

Fig. 229: Snap Ring At Output Shaft 1. Using Snap Ring Pliers (1) remove the snap ring (2) from the output shaft # 2. Fig. 230: Bearing From Cluster Shaft 2. Using a press, blocks, Bearing Sp ...

See also:

Adjustments
ADJUSTMENT The right and left support assemblies are slotted to allow for right/left drive train adjustment in relation to drive shaft assembly length. Check and reposition right and left engin ...

Operation, Diagnosis and Testing
OPERATION The primary benefits of All Wheel Drive are: Superior straight line acceleration, and cornering on all surfaces Better traction and handling under adverse conditions, resulting in ...

VEHICLE IDENTIFICATION NUMBER
The Vehicle Identification Number (VIN) is on the left front corner of the instrument panel and is visible from outside of the vehicle through the windshield. This number also appears on the Automo ...