Diagnosis and testing

SHIFT INTERLOCK SYSTEM Fig. 421: Identifying Ignition Key/Switch Positions - LOCK - ACC - ON - START The Shifter Response Table describes the normal operation of the Brak ...

Description

Fig. 422: Identifying Torque Converter Components - TURBINE - IMPELLER - HUB - STATOR - CONVERTER CLUTCH DISC - DRIVE PLATE The torque converter is a hydraulic device that couples t ...

See also:

Cover(s), cylinder head, right
REMOVAL 1. Disconnect negative battery cable. Fig. 126: Engine Harness Retaining Clips - Left cylinder head cover engine harness retainers - Right cylinder head cover engine harness retainer ...

Crossmember, front fore and aft
REMOVAL 1. Raise and support the vehicle. 2. If equipped, remove the engine belly pan. Fig. 29: Removing/Installing Fore/Aft Crossmember 3. Remove the front engine mount thru-bolt (2). Fig ...

Sensor, mass air flow (MAF)
Removal Fig. 10: MASS AIR FLOW SENSOR 1. Disconnect air flow sensor electrical connector (4). 2. Remove constant tension clamps (1), (2) securing the air flow sensor (3). 3. Remove air flow ...