Dodge Journey: Seal, oil pump
REMOVAL
Fig. 367: Removing Oil Pump Seal
- - SEAL PULLER C-3981-B
- - OIL PUMP SEAL
1. Remove transaxle from vehicle.
2. Using Seal Puller C-3981B (1) , remove oil pump seal (2).
INSTALLATION
Fig. 368: Installing Oil Pump Seal
- - SEAL INSTALLER C-4193
- - HANDLE C-4171
1. Using Seal Installer C-4193A (1) , install oil pump seal.
2. Install transaxle to vehicle.
Relay, transmission control
DESCRIPTION Fig. 366: Locating Transmission Control Relay - TRANSMISSION CONTROL RELAY - POWER DISTRIBUTION CENTER The transmission control relay (1) is located in the Power Distribution ...Sensor, speed, input
DESCRIPTION Fig. 369: Removing/Installing Input Speed Sensor - INPUT SPEED SENSOR The Input Speed Sensor (1) , is a two-wire magnetic pickup device that generates AC signals as rotation oc ...See also:
Fascia, front
REMOVAL
Fig. 1: Pushpins
1. Release hood latch and open hood.
2. Remove the pushpins for the fascia (2) at the radiator support.
Fig. 2: Pop Rivets
3. Hoist and support vehicle on safety st ...
ELECTRONIC BRAKE CONTROL SYSTEM
Your vehicle is equipped with an advanced electronic
brake control system commonly referred to as ESP. This
system includes Anti-Lock Brake System (ABS), Brake
Assist System (BAS), Traction Control ...
Installation
2.4L
Fig. 17: Removing/Installing Ignition Coil
1. Install ignition coil onto spark plug.
Fig. 18: Removing/Installing Ignition Coil Mounting Bolts
2. Install ignition coil mounting bolt, tigh ...