Dodge Journey: Geartrain, planetary
DESCRIPTION
Fig. 355: Identifying Planetary Geartrain Components
- - FRONT SUN GEAR ASSEMBLY
- - #6 THRUST BEARING
- - #7 THRUST BEARING
- - REAR CARRIER/FRONT ANNULUS ASSEMBLY
- - REAR SUN GEAR
- - FRONT CARRIER/REAR ANNULUS ASSEMBLY
The planetary geartrain is located between the input clutch assembly and the rear of the transaxle case. The planetary geartrain consists of two sun gears (1,5) , two planetary carriers, two annulus (ring) gears (4,6), and one output shaft.
OPERATION
The planetary geartrain utilizes two planetary gear sets that connect the transmission input shaft to the output shaft. Input and holding clutches drive or lock different planetary members to change output ratio or direction.
Fluid
STANDARD PROCEDURE FLUID LEVEL AND CONDITION CHECK FLUID LEVEL CHECK Fig. 351: Identifying Fluid Level Indicator - FLUID LEVEL INDICATOR NOTE: Only transmission fluid of the type labele ...Holding clutches
DESCRIPTION Fig. 356: Identifying 2/4 & Low/Reverse Clutches & Planetary Geartrain Components - FRONT PLANET CARRIER/REAR ANNULUS - 2/4 CLUTCH - L/R CLUTCH - REAR PLANET CARRIER ...See also:
INTRODUCTION
Congratulations on selecting your new Chrysler Group
LLC vehicle. Be assured that it represents precision
workmanship, distinctive styling, and high quality - all
essentials that are traditional to ...
Installation
Fig. 32: Brake Booster Vacuum Hose
1. Position engine/transaxle assembly under vehicle and slowly lower vehicle
in short length spans. Inspect
at each interval for potential engine or transaxle ...
Removal
2.7L ENGINE
Fig. 22: Belly Pan
- BELLY PAN
- EXHAUST EXTENSION PIPE
1. Remove the belly pan (2).
Fig. 23: 2.7L Extension Pipe
2. Remove the fasteners (1), and remove the exhaust extens ...