Assembly

Fig. 257: Installing Input Shaft - INPUT SHAFT - ARBOR PRESS - INPUT SHAFT HUB ASSEMBLY Use petrolatum on all seals to ease assembly of components. 1. Using an arbor press (2), install ...

Description, Operation

DESCRIPTION Fig. 297: Identifying Solenoid/Pressure Switch Assembly - SOLENOID AND PRESSURE SWITCH ASSEMBLY The Solenoid/Pressure Switch Assembly (1) is external to the transaxle and mount ...

See also:

Description, Operation
DESCRIPTION The generator is belt-driven by the engine. It is serviced only as a complete assembly. If the generator fails for any reason, the entire assembly must be replaced. The generator produ ...

Removal
2.4L Fig. 59: Identifying Ignition Coil Electrical Connectors NOTE: Prior to removing coil, spray compressed air around coil top to make sure no dirt drops into the spark plug tube. 1. ...

Inspection
CLUTCH INSPECTION - FIXED DISPLACEMENT A/C COMPRESSOR Fig. 212: Identifying Compressor Shaft, Clutch Plate & Shim Examine the friction surfaces of the pulley and the clutch plate (2) for wea ...