Accumulator

DESCRIPTION Fig. 238: Identifying Underdrive & Overdrive Accumulators - RETURN SPRING - UNDERDRIVE CLUTCH ACCUMULATOR - SEAL RING (2) - OVERDRIVE CLUTCH ACCUMULATOR The 41TE underd ...

Disassembly

Fig. 241: Tapping Down Reverse Clutch Reaction Plate - #4 THRUST PLATE (SELECT) - TAP DOWN REVERSE CLUTCH REACTION PLATE TO REMOVE OR INSTALL SNAP RING - INPUT SHAFT CLUTCHES RETAINER ASSEMB ...

See also:

Installation
Fig. 25: Ball Joint Installation 1. Install Installer (2), Special Tool 9964-1, and Installer (4), Special Tool 9964-2 on Remover/Installer (5), Special Tool 8441-1. Place a new ball joint (stem ...

Switch, oil pressure
Description The engine oil pressure switch is located on the right side of the engine block. The switch screws into the engine main oil gallery. The normally closed switch provides an input throug ...

Adjustments
ADJUSTMENT - LATE PRODUCTION TYPE ONLY Two unique brake lamp switches are used in this vehicle, depending upon whether the vehicle was built during early or late production. These switches are not ...