Installation

CAUTION: Be certain to adjust the refrigerant oil level when servicing the A/C refrigerant system. Failure to properly adjust the refrigerant oil level will prevent the A/C system fro ...

Description, Operation

DESCRIPTION NOTE: LHD model shown. RHD model similar. Fig. 226: Heater Core-Description The heater core (1) for the heating-A/C system is mounted within the HVAC air distribution housing, ...

See also:

Fascia, front lower, closeout
REMOVAL Fig. 11: Lower Fascia 1. Remove fasteners (5) to lower closeout. Fig. 12: Push Pins - Front Lower Fascia 2. Remove push pins (1) to lower closeout. 3. Remove the front lower fascia. ...

Installation
Fig. 40: Seal Protector - HALFSHAFT - SEAL PROTECTOR 1. Install halfshaft to hub/bearing assembly. Install hub nut and washer but do not tighten at this time. 2. Using Seal Protector 9 ...

Motor, blower, rear
DESCRIPTION Fig. 191: Rear Blower The rear blower motor (1) is a 12-volt, direct current (DC) motor mounted within a plastic housing with an integral wire connector (4) and a squirrel cage-type ...