Operation

The standard front and available rear heating-A/C systems used in this vehicle are blend-air type systems. In a blend-air system, a blend-air door controls the amount of conditioned air that is a ...

A/C Performance

The A/C system is designed to provide the passenger compartment with low temperature and low humidity air. The A/C evaporator, located in the HVAC housing is cooled to temperatures near the fre ...

See also:

Description, Operation
DESCRIPTION Several combinations of radio receivers and speaker systems are offered. The audio system uses an ignition switched source of battery current so that the system will only operate when ...

With intermediate shaft
NOTE: The inner tripod joints are designed with a retention feature that prevents the tripod rollers from coming out of the inner joint housing up to a specific load. If this feature is o ...

Cover(s), cylinder head, left
REMOVAL 1. Disconnect negative battery cable. 2. Disconnect electrical connectors from ignition coils and capacitor. Reposition electrical harness. 3. Remove ground strap from cylinder head c ...