Sensor, exhaust temperature

REMOVAL EXHAUST TEMPERATURE SENSOR Fig. 44: Exhaust Temperature Sensor - DPF TEMPERATURE SENSOR ELECTRICAL CONNECTOR - DPF TEMPERATURE SENSOR 1. Remove engine cover. 2. Disconnect and ...

Description, Operation, Specifications

DESCRIPTION NOTE: All engines use a fixed ignition timing system. Basic ignition timing is not adjustable. All spark advance is determined by the Powertrain Control Module (PCM). The ign ...

See also:

Description, Operation
DESCRIPTION Fig. 430: Identifying Valve Body Assembly - VALVE BODY - T/C REGULATOR VALVE - L/R SWITCH VALVE - CONVERTER CLUTCH CONTROL VALVE - MANUAL VALVE - CONVERTER CLUTCH SWITCH V ...

Diagnosis and testing
SHIFT INTERLOCK SYSTEM Fig. 421: Identifying Ignition Key/Switch Positions - LOCK - ACC - ON - START The Shifter Response Table describes the normal operation of the Brak ...

Installation
2.4L Fig. 17: Removing/Installing Ignition Coil 1. Install ignition coil onto spark plug. Fig. 18: Removing/Installing Ignition Coil Mounting Bolts 2. Install ignition coil mounting bolt, tigh ...