Valve, positive crankcase ventilation (PCV)

Description The PCV valve contains a spring loaded plunger. The plunger meters the amount of crankcase vapors routed into the combustion chamber based on intake manifold vacuum. Operation Fig. ...

Tube, exhaust gas recirculation (EGR)

Removal 2.7L - LOWER TUBE Fig. 50: Lower Exhaust Gas Recirculation Tube - 2.7L WARNING: The normal operating temperature of the exhaust gas recirculate (EGR) valve and tube is very ...

See also:

Seal, crankshaft oil, front
Removal Fig. 212: Crankshaft Front Oil Seal - Removal - SPECIAL TOOL 6771 1. Remove crankshaft vibration damper. 2. Install Special Tool 8194, Insert into crankshaft nose. Remove seal us ...

Installation
2.4L Fig. 7: Capacitor 2.4L - Bolt - Capacitor - Connector 1. Install ignition coil capacitor (2) and bolt (1), tighten bolt to 10 N.m (88.5 ft. lbs.). 2. Connect electrical connect ...

Link, stabilizer bar
REMOVAL 1. Raise and support the vehicle. Fig. 60: TIRE AND WHEEL MOUNTING 2. Remove the wheel mounting nuts (3), then the tire and wheel assembly (1). Fig. 61: Strut Mounting To Knuckle 3. W ...