Operation

SYSTEM The Powertrain Control Module (PCM) monitors many different circuits in the fuel injection, ignition, emission and engine systems. If the PCM senses a problem with a monitored circuit often ...

Pump, air

Description The air injection pump is located on the left side of the engine compartment. The pump is operated by an internal electrical motor and is mounted to a bracket by rubber isolators. An ...

See also:

Disassembly
HOUSING-AIR DISTRIBUTION NOTE: The air distribution housing must be removed from the HVAC housing and disassembled for service of the blend-air and mode-air doors. NOTE: LHD model with A/C ...

Seal, oil pump
REMOVAL Fig. 367: Removing Oil Pump Seal - SEAL PULLER C-3981-B - OIL PUMP SEAL 1. Remove transaxle from vehicle. 2. Using Seal Puller C-3981B (1) , remove oil pump seal (2). INSTALLA ...

Intermediate shaft, diesel
REMOVAL 2.0L DIESEL 1. Remove the right half shaft. Fig. 50: 2.0L Diesel Right Half Shaft Components 2. Remove the two intermediate shaft bolts (1). 3. Remove the intermediate shaft (2). ...