Ensioner, belt

Removal 2.4L ENGINE Fig. 36: ACCESSORY DRIVE BELT - WORLD ENGINE - POWER STEERING PUMP - ACCESSORY DRIVE BELT - GENERATOR - CRANKSHAFT PULLEY - LOWER IDLER PULLEY - CRANKSHAFT PULLEY ...

Bottle, coolant recovery

Description NON-PRESSURE Fig. 52: NON-PRESSURE COOLANT RECOVERY CONTAINER - COOLANT RECOVERY CONTAINER - OVERFLOW HOSE - RADIATOR PRESSURE CAP The coolant recovery system used on 2.4L e ...

See also:

Tube, air pump, inlet
Description The air pump inlet tube is located on the left side of the engine compartment. The tube attaches to the air injection pump using a quick connect style fitting. The other end of the tub ...

Switch, heated seat
DESCRIPTION Fig. 10: Locating Accessory Switch Bank Module Two heated seat switches are located in the center stack of the instrument panel. The switches are located on the outer edges of the A ...

Standard procedure
PCM/ECM REPROGRAMMING - GAS Follow the instructions in order. OBTAINING DIAGNOSTIC TROUBLE CODES BULB CHECK Key on: Bulb illuminated until vehicle starts, as long as all once per trip (readiness ...