Dodge Journey: Cooling
Dodge Journey Service & Repair Manual / Engine / Cooling
- Description, Operation
- Diagnosis and Testing
- Standard procedure
- Cleaning, Inspection
- Accessory drive
- Engine
- Transmission
Cover(s), engine timing
Removal Fig. 349: FRONT SPLASH SHIELDS 1. Disconnect and isolate negative battery cable. 2. Drain cooling system. 3. Remove coolant pressure container. 4. Remove right front wheel and bel ...Description, Operation
DESCRIPTION Fig. 1: COOLING SYSTEM - OVERVIEW - WINDSHIELD WASHER RESERVOIR - UPPER SUPPORT - FAN SHROUD - FAN MOTOR - LOWER RADIATOR HOSE The cooling system consists of an engine co ...See also:
Valve, exhaust gas recirculation (EGR)
Description
The EGR valve consists of three major components. First there is the pintle,
valve seat, and housing which
contains and regulates the gas flow. Second there is the armature, return
s ...
Diagnosis and Testing
SUSPENSION AND STEERING
CONDITION
POSSIBLE
CAUSES
CORRECTION
Front End Whine On Turns
1. Defective Wheel
Bearing2. Incorrect Wheel
Alignment
3. Worn Tires
...
Assembly
Fig. 239: Output Shaft #2 & Needle Bearing
1. Install the reverse needle bearing (1) onto the output shaft # 2 (2).
Fig. 240: Synchronizer
NOTE: Pay attention to the direction when inser ...