Insulator, engine mount, right

Removal Fig. 243: Belly Pan 1. Remove the belly pan (2). Fig. 244: Right Engine Mount 2. Lower vehicle. Remove the load on the engine motor mounts by carefully supporting the engine assembly ...

Description, Operation, Diagnosis and Testing

DESCRIPTION The lubrication system is a full-flow filtration, pressure feed type. The oil pump body is mounted to the engine block. The pump inner rotor is driven by the crankshaft. A structural w ...

See also:

Sensor, exhaust pressure
REMOVAL EXHAUST PRESSURE SENSOR Fig. 42: DPF Components - ELECTRICAL CONNECTOR - PRESSURE DIFFERENTIAL SENSOR - MOUNTING BOLT - UPSTREAM PRESSURE TUBE - DPF - DOWNSTREAM PRESSURE TUB ...

Rocker arm, valve
DESCRIPTION Fig. 133: Rocker Arm - LASH ADJUSTER POCKET - OIL SQUIRT HOLE - ROLLER The rocker arms are composed of steel stamping with an integral roller bearing. The rocker arms incor ...

Pump, air
Description The air injection pump is located on the left side of the engine compartment. The pump is operated by an internal electrical motor and is mounted to a bracket by rubber isolators. An ...