Dodge Journey: Insulator, engine mount, front
Removal
1. Raise vehicle.
Fig. 222: Belly Pan
- - belly pan fasteners
- - belly pan
2. Remove the belly pan (2).
Fig. 223: Front Engine Mount Through Bolt
3. Remove front mount to bracket horizontal through bolt (2).
Fig. 224: Front Mount Vertical Bolts
4. Remove front mount vertical bolts (2).
5. Remove front mount (3).
Installation
Fig. 225: Front Mount Vertical Bolts
1. Install the front mount (3).
2. Install the front mount vertical bolts (2).
Fig. 226: Front Engine Mount Through Bolt
3. Install the front mount to bracket horizontal through bolt (2).
Fig. 227: Belly Pan
- - belly pan fasteners
- - belly pan
4. Install the belly pan (2).
Adjustments
ADJUSTMENT The right and left support assemblies are slotted to allow for right/left drive train adjustment in relation to drive shaft assembly length. Check and reposition right and left engin ...Insulator, engine mount, left
Removal Fig. 228: Belly Pan 1. Disconnect and isolate the negative battery cable. 2. Remove throttle body air inlet hose and air cleaner housing assembly. 3. Remove the belly pan (2). ...See also:
Damper, vibration
Removal
Fig. 196: Vibration Damper - Removal
- SPECIAL TOOL 8454 PULLER
- SPECIAL TOOL 8194 INSERT
1. Disconnect negative battery cable.
2. Remove right front wheel and belt splash shie ...
Description, Operation
DESCRIPTION
Fig. 231: Receiver/Drier Description
The A/C receiver/drier (1) stores unused refrigerant, filters the
refrigerant, helps remove moisture from the
refrigerant and retains any refrig ...
Standard procedure, Cleaning, Inspection
Standard procedure
BATTERY RECONNECTION
NOTE: This reconnection procedure is to be performed anytime the
battery has been
disconnected.
1. Connect the negative battery cable remote termin ...