Dodge Journey: Seal, crankshaft oil, front
Removal
Fig. 212: Crankshaft Front Oil Seal - Removal
- - SPECIAL TOOL 6771
1. Remove crankshaft vibration damper.
2. Install Special Tool 8194, Insert into crankshaft nose. Remove seal using Special Tool 6771, Remover (1).
Installation
Fig. 213: Crankshaft Front Oil Seal - Installation
- - SPECIAL TOOL 6780-2
- - SPECIAL TOOL 8179
- - SPECIAL TOOL 6780-1
- - SEAL
1. Install new seal using Special Tools 6780-2 Sleeve, 6780-1 Installer, and 8179 Stud (2).
2. Install crankshaft vibration damper.
Rod, piston and connecting
Description Fig. 206: Piston & Connecting Rod - "F" TOWARD FRONT OF ENGINE - RING COMPRESSOR - SPECIAL TOOL 8189 - OIL SQUIRT HOLE The pistons (1) are made of a high stre ...Seal, crankshaft oil, rear
Removal Fig. 214: REAR MAIN SEAL-INSTALLED The crankshaft rear oil seal is incorporated in the seal adapter (2) and can not be removed from the adapter. The crankshaft rear oil seal/seal adapte ...See also:
Diagnosis and Testing
LOWER BALL JOINT
1. Raise the vehicle allowing the front suspension to hang.
2. Remove the tire and wheel assembly.
3. Using Dial Indicator C-3339A, or equivalent, attach the dial indicator mou ...
Relay, transmission control
DESCRIPTION
Fig. 366: Locating Transmission Control Relay
- TRANSMISSION CONTROL RELAY
- POWER DISTRIBUTION CENTER
The transmission control relay (1) is located in the Power Distribution
...
Diagnosis and Testing
LAMPS/LIGHTING - EXTERIOR
WARNING: To avoid serious or fatal injury on vehicles equipped
with airbags, disable
the Supplemental Restraint System (SRS) before attempting any steering
...