Dodge Journey: Seal(s), valve guide
REMOVAL
Fig. 139: Valve Stem Seal-Removal/Installation
- - VALVE SEAL TOOL
- - VALVE STEM
1. Remove valve spring.
2. Remove valve stem seal by using a valve seal tool.
INSTALLATION
Fig. 140: Valve Stem Seal-Removal/Installation
- - VALVE SEAL TOOL
- - VALVE STEM
1. The valve stem seal/valve spring seat should be pushed firmly and squarely over the valve guide using the valve stem as guide. Do Not Force seal against top of guide.
2. Install valve spring.
Rocker arm, valve
DESCRIPTION Fig. 133: Rocker Arm - LASH ADJUSTER POCKET - OIL SQUIRT HOLE - ROLLER The rocker arms are composed of steel stamping with an integral roller bearing. The rocker arms incor ...Spring(s), valve
Description The valve springs are made from high strength, chrome-silicon steel. The springs are common for intake and exhaust applications. The valve spring seat is integral with the valve stem ...See also:
Description, Diagnosis and Testing
Description
Fig. 17: PEDAL AND BOOSTER MOUNTING - LHD
The power brake booster (3) is mounted to the engine side of the dash panel.
The master cylinder is bolted to
the front of the booster. A v ...
Removal
Fig. 60: Support Module With Jack
- DRIVELINE MODULE
- TRANSMISSION JACK
NOTE: Rear suspension and drivetrain design require this procedure to
be performed
on a "drive-on" ...
TIRE PRESSURE MONITOR SYSTEM (TPMS)
The Tire Pressure Monitor System (TPMS) will warn the
driver of a low tire pressure based on the vehicle recommended
cold placard pressure.
The tire pressure will vary with temperature by about
1 ...