Description

Fig. 1: 2.7 Liter Engine The 2.7 Liter (167 Cubic Inches) 60 degree V6 engine is a double overhead camshaft design with hydraulic lifters and four valves per cylinder. The engine does not have p ...

Engine diagnosis

ENGINE DIAGNOSIS - INTRODUCTION Engine diagnosis is helpful in determining the causes of malfunctions not detected and remedied by routine maintenance. These malfunctions may be classified as e ...

See also:

Description, Diagnosis and Testing
DESCRIPTION Fig. 38: Front Hub And Bearing Mounting The knuckle (3) is a single casting with legs machined for attachment to the front strut assembly on the top and steering linkage on the trai ...

Removal
Fig. 93: Accessory Drive Belt System - 2.7L - GENERATOR - IDLER/TENSIONER 1. Perform fuel pressure release procedure before attempting any repairs. 2. Disconnect negative cable from rem ...

Resistor, blower motor, rear
DESCRIPTION Fig. 62: Rear Blower Resistor A blower motor resistor is used on this model when equipped with the manual temperature control (MTC) rear heating-A/C system. Models equipped with the ...