Dodge Journey: Intermediate shaft, diesel
REMOVAL
2.0L DIESEL
1. Remove the right half shaft.
Fig. 50: 2.0L Diesel Right Half Shaft Components
2. Remove the two intermediate shaft bolts (1).
3. Remove the intermediate shaft (2).
Fig. 51: Intermediate Shaft Bracket & Bolts
4. If necessary, remove the intermediate shaft bracket bolts (1) and the intermediate shaft bracket (2).
INSTALLATION
2.0L DIESEL
Fig. 52: Intermediate Shaft Bracket & Bolts
1. If the intermediate shaft bracket was removed, install the intermediate shaft bracket (2), and the intermediate shaft bracket bolts (1). Tighten the bolts to 23 Nm (17 in. lbs.).
Fig. 53: 2.0L Diesel Right Half Shaft Components
2. Install the intermediate shaft (2).
3. Install the two intermediate shaft bolts (1). Tighten the bolts to 38 Nm (28 in. lbs.).
4. Install the right axle half shaft.
Intermediate shaft, gas
REMOVAL
2.4L
1. Remove the right half shaft.
Fig. 44: Intermediate Shaft - 2.4L
2. Remove the three intermediate shaft bolts (1).
3. Remove the intermediate shaft (2).
2.7L
1. Remove the r ...
Propeller shaft
...
See also:
Link, stabilizer bar
REMOVAL
1. Raise and support the vehicle.
Fig. 60: TIRE AND WHEEL MOUNTING
2. Remove the wheel mounting nuts (3), then the tire and wheel assembly (1).
Fig. 61: Strut Mounting To Knuckle
3. W ...
ILLUMINATED ENTRY
The interior lights will turn on when you press the
UNLOCK button on the Remote Keyless Entry (RKE)
transmitter or open a door or the liftgate.
This feature also turns on the approach lighting (if
...
Lines, A/C underbody, extension
Description
Fig. 310: Underbody A/C Extension Lines Description
Models equipped with the rear heating-A/C system use metal lines attached to
the vehicle underbody to carry
refrigerant and engin ...
