With intermediate shaft

NOTE: Never grasp the halfshaft assembly by the inner or outer boots. This can cause damage to the boot, which will allow contaminants to enter the C/V joint. NOTE: The inner tripod joints ...

Without intermediate shaft

NOTE: The inner tripod joints are designed with a retention feature that prevents the tripod rollers from coming out of the inner joint housing up to a specific load. If this feature is o ...

See also:

Sensor, variable line pressure
DESCRIPTION Fig. 390: Identifying Variable Line Pressure Sensor - PRESSURE CONTROL SOLENOID - LINE PRESSURE SENSOR - SHOULDER SCREW - VARIABLE LINE PRESSURE HEADER - MANUAL SHAFT - SC ...

Lever, shift
REMOVAL Fig. 183: Air Cleaner And Inlet Tube Remove the engine cover. 1. Disconnect battery negative cable. 2. Remove air inlet tube (2) and air cleaner assembly (4). Fig. 184: Nut Crosso ...

Heated Mirrors
DESCRIPTION Fig. 1: Rear Window Defogger (EBL) System NOTE: Manual tri-zone temperature A/C-heater control shown. Other A/C-heater controls similar. When equipped, the heated mirror sys ...