Dodge Journey: Heated Glass
Dodge Journey Service & Repair Manual / Accessories and Equipment / Heated Glass
Crossmember, rear suspension
REMOVAL 1. Raise and support the vehicle. Fig. 52: Tire And Wheel Mounting 2. On each side of the vehicle, remove the wheel mounting nuts (3), then the front tire and wheel assembly (1). Fi ...Description, Operation
DESCRIPTION CAUTION: Grid lines can be damaged or scraped off with sharp instruments. Care should be taken in cleaning glass or removing foreign materials, decals or stickers. Normal glass ...See also:
EMISSIONS CONTROL SYSTEM MAINTENANCE
The Scheduled Maintenance services listed in bold type,
must be done at the times or mileages specified to ensure
the continued proper functioning of the Emissions Control
System. These, and all ot ...
Removal
Fig. 35: Removing/Installing Halfshaft Nut
NOTE: Rear suspension and drivetrain design require this procedure to
be performed
on a "drive-on" hoist, as the front and rear suspensi ...
Removal
WARNING: Refer to the applicable warnings and cautions for this
system before
performing the following operation. Failure to follow these instructions
may
result in serious or fat ...