Dodge Journey: Description, Operation
DESCRIPTION
Several combinations of radio receivers and speaker systems are offered. The audio system uses an ignition switched source of battery current so that the system will only operate when the ignition switch is in the RUN or ACCESSORY positions.
The audio system includes the following components:
- Antenna (Radio and Satellite)
- Power amplifier (with premium speaker system only)
- Radio noise suppression components
- Radio receiver
- Remote radio switches (if equipped)
- Satellite Receiver (integrated within the radio)
- Speakers
OPERATION
The audio system components are designed to provide audio entertainment and information through the reception, tuning and amplification of locally broadcast radio signals in both the Amplitude Modulating (AM) and Frequency Modulating (FM) commercial frequency ranges.
The audio system components operate on battery current received through a fuse in the Power Distribution Center (PDC) (Diesel Only) or the Totally Integrated Control Module (TIPM) on a fused ignition switch output (run-acc) circuit so that the system will only operate when the ignition switch is in the Run or Accessory positions.
Audio and Video
...
Diagnosis and Testing
Video
VIDEO SYSTEM DIAGNOSIS
CONDITION
POSSIBLE
CAUSES
CORRECTION
NO VIDEO (DVD
PLAYER WILL NOT LOAD OR EJECT)
1. Fuse inoperative.
1. Check fuses. Replace fuse ...
See also:
Description
Fig. 1: Exterior Lighting System
The exterior lighting system for this vehicle includes the following exterior
lamp units:
Center High Mounted Stop Lamp (3) - A standard equipment Center High ...
Installation
NOTE: Perform 1 through 5 on each side of the vehicle to complete pad
set installation,
then proceed to 6.
NOTE: Make sure that the audible wear indicator (if equipped) is placed
toward ...
REPLACEMENT BULBS
All the inside bulbs are brass or glass wedge base.
Aluminum base bulbs are not approved and should not
be used for replacement.
LIGHT BULBS – Interior Bulb Number
Courtesy/Reading Lamps (Incand ...
