Removal, Installation

REMOVAL 1. Remove transmission and torque converter from vehicle. 2. Place a suitable drain pan under the converter housing end of the transmission. CAUTION: Verify that transmission is ...

Description, Operation

DESCRIPTION Fig. 430: Identifying Valve Body Assembly - VALVE BODY - T/C REGULATOR VALVE - L/R SWITCH VALVE - CONVERTER CLUTCH CONTROL VALVE - MANUAL VALVE - CONVERTER CLUTCH SWITCH V ...

See also:

Installation
Fig. 32: Brake Booster Vacuum Hose 1. Position engine/transaxle assembly under vehicle and slowly lower vehicle in short length spans. Inspect at each interval for potential engine or transaxle ...

Adjustments
ADJUSTMENT The right and left support assemblies are slotted to allow for right/left drive train adjustment in relation to drive shaft assembly length. Check and reposition right and left engin ...

Installation
LEFT-HAND-DRIVE Fig. 35: BOOSTER SEAL NOTE: Before power brake booster (1) installation, be certain a NEW dash seal (2) is installed on the booster mounting studs. Fig. 36: PEDAL AND ...