Valve, A/C expansion

DESCRIPTION Fig. 315: A/C Expansion Valve Description KA The rear A/C expansion valve controls the amount of refrigerant entering the rear A/C evaporator. The rear A/C expansion valve is of a t ...

Relay, heater unit

DESCRIPTION Fig. 320: Standard ISO-Type Relay Three relays (1) are used for the electric positive temperature coefficient (PTC) heater system when equipped with the 2.0L diesel engine. The rela ...

See also:

Pan, oil
Removal Fig. 259: Identifying Oil Dipstick Tube & Bolt 1. Disconnect and isolate the negative battery cable. 2. Remove the bolt (1) and the engine oil dipstick tube (2). Fig. 260: Belly ...

Fluid, differential
Standard Procedure STANDARD PROCEDURE - DIFFERENTIAL ASSEMBLY FLUID CHANGE Fig. 79: Differential Assembly Fluid Change The drain plug (2) for the differential assembly is located in the bottom of ...

Standard procedure
BRAKE ROTOR MACHINING NOTE: Refacing the rotor is not required each time the brake pads are replaced, only when the need is foreseen. Any servicing of the rotor requires extreme care to ma ...