Installation

CAUTION: Be certain to adjust the refrigerant oil level when servicing the A/C refrigerant system. Failure to properly adjust the refrigerant oil level will prevent the A/C system fro ...

Description, Operation

DESCRIPTION NOTE: LHD model shown. RHD model similar. Fig. 226: Heater Core-Description The heater core (1) for the heating-A/C system is mounted within the HVAC air distribution housing, ...

See also:

Seal, axle drive shaft
REMOVAL Fig. 197: Axle Shaft Seal Removal 1. Remove axle shaft. 2. Insert a flat-blade pry tool (2) at outer edge of axle shaft seal (1). 3. Tap on the pry tool (2) with a small hammer and ...

Standard procedure
CYLINDER HEAD OIL GALLERY CUP PLUG SERVICE Fig. 92: Oil Gallery Cup Plug - CUP PLUG BORE CHAMFER - ORIGINAL CUP PLUG - NEW CUP PLUG - 1-2 mm NOTE: DETERMINE WHICH CUP PLUG IS LEAKIN ...

Crossmember, front fore and aft
REMOVAL 1. Raise and support the vehicle. 2. If equipped, remove the engine belly pan. Fig. 29: Removing/Installing Fore/Aft Crossmember 3. Remove the front engine mount thru-bolt (2). Fig ...