Standard procedure

REFRIGERANT SYSTEM SERVICE EQUIPMENT WARNING: Refer to the applicable warnings and cautions for this system before performing the following operation. Failure to follow these instructio ...

Description

FIXED DISPLACEMENT A/C COMPRESSOR Fig. 200: Denso 10SR17 Compressor NOTE: Denso 10SR17 shown. Denso 10SR15 similar. 2.7L and 3.5L 5-Passenger models are equipped with the Denso 10SR15 A/C ...

See also:

Description, Operation
DESCRIPTION The generator is belt-driven by the engine. It is serviced only as a complete assembly. If the generator fails for any reason, the entire assembly must be replaced. The generator produ ...

Installation
Fig. 101: Check For Stretched Bolts - STRETCHED BOLT - THREADS ARE NOT STRAIGHT ON LINE - THREADS ARE STRAIGHT ON LINE - UNSTRETCHED BOLT NOTE: The cylinder head bolts (4) are tighte ...

Assembly
Fig. 65: Remove Input Shaft Bearing Cup NOTE: Always use ATF on all moving parts during this assembly procedure. 1. Use Bearing Cup Remover 9664 (2) and appropriate Slide Hammer (1) to r ...