Description, Operation, Specifications

DESCRIPTION NOTE: All engines use a fixed ignition timing system. Basic ignition timing is not adjustable. All spark advance is determined by the Powertrain Control Module (PCM). The ign ...

Removal

2.4L Fig. 3: Capacitor 2.4L - Bolt - Capacitor - Connector 1. Disconnect and isolate negative battery cable at battery. 2. Remove engine cover. 3. Remove electrical connector (3). ...

See also:

Disassembly
NOTE: The strut assembly must be removed from the vehicle for it to be disassembled and assembled. For the disassembly and assembly of the strut assembly, use strut spring compressor, tea ...

Seal, output flange
REMOVAL Fig. 93: Axle Seal Removal - SEAL - SCREWDRIVER 1. Raise vehicle on hoist. 2. Remove rear driveline module. 3. Use suitable screwdriver (2) to remove output seal (1). INSTA ...

Description, Diagnosis and Testing
DESCRIPTION The inner joints of both half shaft assemblies are tripod joints. The outer joints of both assemblies are Rzeppa Joints. The tripod joints are true constant velocity (CV) joint assembl ...