Valve, exhaust gas recirculation (EGR), 2.0L Diesel

Description The EGR valve is mounted to the intake manifold. Operation The engines use Exhaust Gas Recirculation (EGR) systems. The EGR system reduces oxides of nitrogen (NOx) in engine exhaust ...

Description

Fig. 1: Muffler/Exhaust Pipe Assembly - Single Tail Pipe - INSULATOR - MUFFLER/EXHAUST PIPE ASSEMBLY - BAND CLAMP The exhaust system on the 2.4L and 2.7L engine models consists of a front ...

See also:

Removal
1. Raise and support vehicle. NOTE: Perform 2 through 5 on each side of vehicle to complete pad set removal. Fig. 124: TIRE AND WHEEL MOUNTING 2. Remove wheel mounting nuts (3), then tire ...

Installation
2.4L Fig. 17: Removing/Installing Ignition Coil 1. Install ignition coil onto spark plug. Fig. 18: Removing/Installing Ignition Coil Mounting Bolts 2. Install ignition coil mounting bolt, tigh ...

Intermediate shaft, gas
REMOVAL 2.4L 1. Remove the right half shaft. Fig. 44: Intermediate Shaft - 2.4L 2. Remove the three intermediate shaft bolts (1). 3. Remove the intermediate shaft (2). 2.7L 1. Remove the r ...