Valve, exhaust gas recirculation (EGR)

Description The EGR valve consists of three major components. First there is the pintle, valve seat, and housing which contains and regulates the gas flow. Second there is the armature, return s ...

Description, Operation

DESCRIPTION OPERATION The following procedure has been established to assist technicians in the field with enabling and running OBD II Monitors. The order listed in the following procedur ...

See also:

Installation
NOTE: Perform 1 through 6 on each side of vehicle to complete pad set installation, then proceed to 7. CAUTION: Anytime the brake rotor or brake pads are being replaced, the rear cal ...

Input shaft, transmission
DISASSEMBLY Fig. 175: Snap Ring At Input Shaft 1. Remove the snap ring (2) that retains the input shaft bearing and sixth gear to the shaft. Fig. 176: Press Bearing From Input Shaft 2. Using ...

Speed Control
SWITCH, SPEED CONTROL REMOVAL Fig. 1: Removing/Installing Horn Switch WARNING: Disconnect and isolate the battery negative (ground) cable before beginning steering wheel removal or ...