Valve, positive crankcase ventilation (PCV)

Description The PCV valve contains a spring loaded plunger. The plunger meters the amount of crankcase vapors routed into the combustion chamber based on intake manifold vacuum. Operation Fig. ...

Tube, exhaust gas recirculation (EGR)

Removal 2.7L - LOWER TUBE Fig. 50: Lower Exhaust Gas Recirculation Tube - 2.7L WARNING: The normal operating temperature of the exhaust gas recirculate (EGR) valve and tube is very ...

See also:

Bearing(s), connecting rod
Standard Procedure CONNECTING ROD AND BEARING FITTING CONNECTING ROD BEARING Fig. 166: Checking Connecting Rod Bearing Clearance-Typical Fit all connecting rods on one bank until complete. Th ...

Description
Fig. 1: Front Suspension Components This vehicle has a gas pressurized MacPherson strut type front suspension design. Each side of the front suspension consists of these major components: ...

Pan, oil
Removal Fig. 259: Identifying Oil Dipstick Tube & Bolt 1. Disconnect and isolate the negative battery cable. 2. Remove the bolt (1) and the engine oil dipstick tube (2). Fig. 260: Belly ...