Manifold, intake

Diagnosis and Testing INTAKE MANIFOLD LEAKS An intake manifold air leak is characterized by lower than normal manifold vacuum. Also, one or more cylinders may not be functioning. WARNING: ...

Description, Standard procedure

DESCRIPTION Fig. 331: Identifying Timing Drive System Components The timing drive system has been designed to provide quiet performance and reliability to support a NON freewheeling engine. The ...

See also:

FUSES
Totally Integrated Power Module The Totally Integrated Power Module (TIPM) is located in the engine compartment near the air cleaner assembly. This center contains fuses and relays. Totally Inte ...

Mechanism, gearshift
REMOVAL Fig. 193: Shift Cables To Shifter 1. Detach gear shift boot from console. 2. Remove the center console assembly. 3. Remove rear power window switch (if equipped) and disconnect ha ...

Removal
2.4L Fig. 45: Locating Knock Sensor The knock sensor bolts into the side of the cylinder block in front of the starter under the intake manifold. 1. Disconnect and isolate negative battery ca ...