Dodge Journey: Air intake system
Specifications
2.7L ENGINE
GENERAL SPECIFICATIONS
CYLINDER BLOCK
PISTONS
PISTON PINS
PISTON RINGS
PISTON RING SIDE CLEARANCE
PISTON RING WIDTH
CONNECTING RODS
CRANKSHAFT MA ...
Air cleaner
REMOVAL
Fig. 85: Air Filter Housing Clips
1. Disengage the air filter housing clips (1).
2. Slide the air filter housing cover (2) forward slightly to disengage tabs
from the bottom of the ai ...
See also:
Solenoid, exhaust gas recirculation (EGR), 2.0L Diesel
Description
Fig. 71: Exhaust Gas Recirculation (EGR) Solenoid - 2.0L Diesel
- EGR solenoid electrical connector
- EGR vacuum harness
The EGR solenoid (4) is mounted to a bracket attached t ...
With intermediate shaft
NOTE: Never grasp the halfshaft assembly by the inner or outer boots.
This can cause
damage to the boot, which will allow contaminants to enter the C/V joint.
NOTE: The inner tripod joints ...
Removal
Fig. 56: BRAKE PEDAL HOLDING TOOL
1. Using a brake pedal holding tool as shown, depress the brake pedal past
its first one inch (25 mm) of
travel and hold it in this position. This will isolate ...