Engine

...

Description

Fig. 1: 2.7 Liter Engine The 2.7 Liter (167 Cubic Inches) 60 degree V6 engine is a double overhead camshaft design with hydraulic lifters and four valves per cylinder. The engine does not have p ...

See also:

Seal, axle drive shaft
REMOVAL Fig. 197: Axle Shaft Seal Removal 1. Remove axle shaft. 2. Insert a flat-blade pry tool (2) at outer edge of axle shaft seal (1). 3. Tap on the pry tool (2) with a small hammer and ...

DRIVING ON SLIPPERY SURFACES
Acceleration Rapid acceleration on snow covered, wet, or other slippery surfaces may cause the front wheels to pull erratically to the right or left. This phenomenon occurs when there is a differe ...

Transducer, A/C pressure
DESCRIPTION Fig. 44: A/C Pressure Transducer - A/C PRESSURE TRANSDUCER The A/C pressure transducer (1) is a switch that is installed on a fitting located on the A/C liquid line at the righ ...