Dodge Journey: Removal
Description, Diagnosis and Testing
DESCRIPTION This vehicle is equipped with either an equal length halfshaft system, consisting of short halfshafts on both sides with an intermediate drive shaft on the right side, or an unequal le ...Without intermediate shaft
NOTE: Never grasp the halfshaft assembly by the inner or outer boots doing so may damage to the boot. NOTE: The inner tripod joints are designed with a retention feature that prevents t ...See also:
Installation
DIESEL PARTICULATE FILTER
Fig. 12: Engine Support Bracket Bolts
1. Position the DPF and turbocharger gasket into the vehicle. Do not tighten
at this time
2. Tighten the three bolts (1) at the ...
Cleaning, Inspection
CLEANING
Drain cooling system and refill with clean water. Refer to drain and fill
procedures in this service information .
Run engine with radiator cap installed until upper radiator hose is ho ...
Lines, A/C underbody, extension
Description
Fig. 310: Underbody A/C Extension Lines Description
Models equipped with the rear heating-A/C system use metal lines attached to
the vehicle underbody to carry
refrigerant and engin ...