Standard procedure

PARKING BRAKE CABLE TENSION RELEASE - FOOT LEVER Use the following procedure to release the tension from the parking brake cables and the automatic adjuster in the parking brake lever (pedal) mech ...

Removal

WITH FOOT LEVER 1. Release the parking brake. 2. Raise and support the vehicle. 3. Manually release the parking brake cable tension. Fig. 186: PARKING BRAKE CABLE EQUALIZER 4. Collapse t ...

See also:

Standard Procedure
MASTER CYLINDER BLEEDING 1. Clamp the master cylinder in a vise with soft-jaw caps. Fig. 88: BLEEDING MASTER CYLINDER WITH ABS 2. Thread a Bleeder Tube (2), Special Tool 8358-1, into the primary ...

WINDSHIELD WIPERS AND WASHERS
The windshield wiper/washer control lever is located on the right side of the steering column. The front wipers are operated by rotating a switch, located at the end of the lever. For information o ...

Solenoid, evaporative emissions purge
Operation During the cold start warm-up period and the hot start time delay, the PCM does not energize the solenoid. When de-energized, no vapors are purged. The proportional purge solenoid o ...